Home Bar Cabinet Designs

home bar cabinet designs
Help with MAME cabinet design?

Hey, I'm building a MAME cabinet top bar on the basis of the guide Hak.5 seen in the episode. I have a few questions. The episode can be found here: http://www.youtube.com/watch?v=aa5VmDt2ksQ&feature=channel 1) In the episode that mentions the use of "Quick Connect" around 5:46. What are they really called and where I can get? Home Depot? 2) About how much is 8-foot by 4 foot sheet of MDF? Where I can get it? 3) How I can mount the controls on the cover of control? 4) I bought an I-PAC to the interface of controls, but how I can connect the buttons and joysticks to it and what kind of cable should I use? 5) How to add the finishing of granite? Thanks in advance for any help you can give me, creating something like this has been a long time goal of mine and I hope to finish next week! Thanks again!

1) name is female spade connectors (you can get at Home Depot, walmart, or any automotive store) … Knowing that different colors in the size of represent different connector cable. Keeping with the blues …. 2) Home Depot is the easiest. It should run about $ 30.00. Collect about 12 carriers in L 1-inch, I would use a 12-inch piano hinge instead of the hinges used. and small knockers. 3) Ah Ha, good question ….. They rushed to secure throughout and showed no big deal. Would you screw from each side panel in the control panel. (I put 3 screws per side.) You must do all of the court of his panel control and fit testing of controls. Remove the controls and the contact paper. Now reinstall the checks, and wire up. Now screw the control panel the cabin. Do not place the contact paper in the cabinet until everything else is done. The paper will hide the screws and holes. 4) For the changes to Question 1. The I-PAC is the way forward. Comes with instructions and once you get can locate places of interest at explaining in more detail. Wire size I would use wire solid copper telephone. The I-pac and Secure the cable easily. The joysticks and buttons suggest soldering the wires to the post instead of using a female spade connectors cells. 5) The appearance of granite is like the contact paper. Finally Good luck, twice a measure to cut …… Just take your time and safe use in building this.

White LED Light Kit (Warm White, Cool White) – Under Cabinet, Bar, Behind TV, Accent Lighting

Leave a Reply