Beer Towers
The choice of a refrigerator Kegerator Conversion
For those not in the know a kegerator is a beer dispensing device. The barrel is kept under refrigeration to keep it chilled. The beer can remain fresh for many months to come, despite cooling periods prolonged. Before converting a refrigerator into a kegerator, you should first list their needs. Which is exactly what you expect from this device? After determining your needs and goals, you can now shop around for an acceptable ship.
The most common coolers for conversion kegerator are the stand-up refrigerator and freezer to the waist. There are a number of issues to be considered before conversion. One of these considerations is space. You must ensure that there is enough space for the smooth conversion of the fridge. The conversion process will also be affected by its intended use. Will have it ready for storage of beer alone? How many beers are serving time?
The most likely candidates for conversion are refrigerators stand-up. This is due to the ease of conversion. All you have to do is drill in the door and mount their offspring beer and trays in the door. Before starting drilling process, ensure that refrigerant lines are installed in the doors. This is very important. If you make a mistake and drill in one of these pipes, then her dream would be a failure even before starting. There are several ways to determine whether such tubes are present. Observe the door and see if there are pipes running to the door. Also note the hinges of the door to see if they are unnecessarily bulky. This is a sure sign of their presence. However, if you are still in doubt is the best confirmation. This will make removing the inner lining panel.
When used in refrigerators or freezers small, need to be sure they will be able to accommodate the barrel. It would be a disaster, for example, if you bought a refrigerator or freezer intend to make only to find that can not meet its barrel. Therefore, you need to make precise measurements to ensure that the refrigerator or freezer is large enough to accommodate the barrel. It is also important ensure that the bottom is flat. It may be necessary to build a double bottom in the device to prevent falling barrels each time you open the door.
If you desire to have a kegerator with a greater capacity, it is necessary to use a storage freezer. This is the case that has at least four kegerator faucets. Much more work needs to be done on these products. It will require the installation of towers of fire as this will provide more space for cold storage and lagering of beers. In the case of a freezer kegerator basis, it is necessary to change the temperature controller. This requires some experience in electronics. You can do this yourself if you have any level of competition. If not, it may be necessary to engage an expert in electronics. If you look carefully the above issues, you will be the proud owner of a kegerator fully operational.
About the Author
This article was written by Felicia Jenkins for
beerkegaccessories.com
– the leading online store for
kegerator parts
and accessories.
Beer Tower Number Two